I provide honest ratings and reviews on tech, toys, and consumer home goods that I've purchased and used. Reviews are based on hands-on testing and personal observations. All opinions and comments are my own.
Disclosure: ReviewedbyPhil is reader-supported. If you click on or buy something via an affiliate link on this site, I may earn a commission.
Takeaway: Works but depends on input/output resolution compatibility. You'll receive the converter and 24" audio cable. The unit measures 2" x 1 ¼" by ½" thick. This adapter convert from HDMI signal to VGA video and 1/8" jack output. Not that this conversion only works in this direction and will not work for VGA to HDMI conversion. Note that your TV's VGA input must support the resolution of the input signal. For example, this adapter worked well with my computer's HDMI output in my 40" LG TV, but when I tried my Amazon Fire TV stick it gave me an Invalid Input message. However, the adapter did work with the Amazon Fire TV Stick on my 50" Sharp Aquos. Both the video and audio were clear and there didn't appear to be any loss of resolution as long as the TV could manage the resolution through the VGA input
Takeaway: Simple setup, low resolution/brightness, short cord, WiFi works ok, no tripod mounting. The projector comes with a 5 ft power cable, RCA input cable, a remote control, and an instruction sheet. The projector is fairly compact measuring 8"W x 6"L x 3"H. It weighs just over 2 lbs. On the front of the projector is the 2.5" lens which comes with a rubber lens cap. There are two dials behind the lens, the large one controls the size/focus of the image and the smaller ring controls the pitch of the image; if the projector is on tilt it can correct for that. The remote requires 2 AAA batteries which are not included.
The lens cap for the projector is pretty flimsy and tends to fall out a lot on its own, so it's easy to lose. The cap can only be "attached" with the lens retracted all the way and there are no snaps which is why it always falls out. The power cable on this unit is a bit short and the projector doesn't have a thread mounting hole on the bottom for attaching to a tripod.
At 1200 lumens, the image isn't super bright, so you'll need pretty dark conditions to see the screen. During the day it is faded, so this unit won't be able to replace your big screen television. Also the resolution is only 800 x 480 px like a VGA computer monitor. It is not HD (Hi-Def). The WiFi connection is a bit tricky at first but once explained is straightforward. Once connected, any device on the network with DLNA can stream content tot he projector like music, video, and photos; the projector cannot browse those network locations.
The internal speaker on the unit is pretty weak so a separate external speaker hooked up to the headphone jack is recommended. The color depth produced by the projector is not deep and the color balance was way off (very orangey).
In general, the projector works alright with a bit of effort. There are a few design improvement that would make the unit more usable, like a tripod mounting option, longer power cord, a better lens cap, and more powerful internal speaker. The resolution isn't very high at 800x480 so expect pixelated picture quality similar to VHS on a tube television (low color depth and contrast). It could be okay for movie night with the kids or a slideshow at a party. Just make sure it's pretty dark wherever you use it.
