Tabiger Soldering Iron Kit Review

Tabiger Soldering Iron Kit Review

Buy it at Amazon: Tabiger Soldering Iron Kit [Affiliate Link]

Takeaway: Heats up quickly, lots of accessories for a variety soldering projects, easy to use.

You'll receive the soldering iron and other accessories in this small tool box. There are two side compartments in the lid, but the door on the left hand side of mine was broken when I received it. There's also a small compartment near the front and a hole for you to lock the tool box up (a lock is not included). Inside in the upper tray you'll find a pair of wire snips, a small screwdriver, a roll of electrical tape, a spool of 0.1mm diameter copper wire and a small box of rosin. Under that section in the main compartment are a set of five additional soldering tips, a roll of de-soldering wick, instruction manual, the soldering iron with a pre-install medium tip, an exacto knife, a de-soldering suction pen, a metal stand, a roll of solder, and two tweezers. The stand requires minimal assembly to attach the iron holder coil to the metal base. There's also a thin sponge that you can use to clean the tip of the iron.

The soldering iron is about the size of a pen and measures 7.5" long. It has a rubberized grip were you hold the iron and is rated for 110V and 60 Watts. At the end of the iron is a dial for adjusting the temperature of the tool tip from 200 to 450 degrees Celsius (for different types of solder). The power cable on the iron is about 4.5 ft long. Changing the tip is pretty straight forward, but you have to be careful not to damage the ceramic core under the tip. Overall, the soldering iron works as well as I expected. Adjusting the temperature is simple and the extra accessories give you a good range for different projects.

Buy it at Amazon: Tabiger Soldering Iron Kit [Affiliate Link]

Comments

Popular posts from this blog

Ezapor 100 Inch Foldable Indoor/Outdoor Movie Projector Screen Review