Huryee Magnetic Portable Rechargeable Under Cabinet LED Lights Installation and Review

Huryee Magnetic Portable Rechargeable Under Cabinet LED Lights Installation and Review

Buy it at Amazon: Huryee Magnetic Portable Rechargeable Under Cabinet LED Lights [Affiliate Link]

Takeaway: Portable, bright, easy to install, bright rechargeable LED lights

You’ll receive 3 LED light bars, 3 metal mounting plates, 3 microUSB charging cables, two remote controls in holsters, an instruction manual, six 2.5” double-sided stickers, two 1” double-sided stickers, and 10 wood screws. The lights measure 7” long, 1” wide, and 0.5” thick. The housing of these LEDs is aluminum and on the front is a translucent white plastic diffuser, while on the back you have a magnetic strip that will attach to the metal plates for easy installation. There are also two keyhole hanging holes that you can use to hook onto a pair of the included screws.

On one side of the light, you’ll find a microUSB port for charging. Just connect the included cable and plug it into any powered USB port. A blue indicator will illuminate. You can also use the light fixture while it is charging. Since you receive three charging cables you can charge all three at once, and the indicator will turn green when the units are fully charged, which takes approximately 2 hours. On the other side is the control switch and setting it to ‘Auto’, the middle position, lets you use the remote control with the light; just point it at the receiver in the middle. When using the remote, remember to first remove the plastic battery saver tab. After you turn the light on, you can adjust the brightness using the 100%, 50%, and 20% buttons for high, medium, and low brightness respectively. Note that these lights only have 1 color temperature of natural daylight white. The timer buttons in the middle are for 15, 30, and 60 minutes and if you press one of those, the light will automatically shut off after that amount of time has elapsed. The light will remember the last brightness setting it was on, so that when you turn the light off and on again, it will be at the same brightness.

Installing the lights is simple and straightforward. Attach two pieces of the long double-sided stickers to either end of the metal mounting plates, peel off the backing sheet, then stick the plates where you want the lights attached, for example, under a cabinet or in a closet. Then place the LED light over the metal plate and the magnetic will stick to it. The magnet makes it easy to adjust the position if you need to. In addition to ‘Auto’ mode for the remote, there is also an ‘On’ mode which keeps the light at 100% brightness, however, the remote will not work in this mode. When you need to recharge the light, simply take it down and plug it in, or to save battery when not in use, you can switch the light off completely. You can use either remote to control any of the lights. Just point to the light you want control and push the button and they will respond one at a time. You can wall mount the holster for the remote using two of the included screws, or you can place it on any vertical surface using the double sided tape, for example, on the inside of a cabinet door.

Overall, these lights are very quick and simple to use and install. The lights function great and respond readily to the remote controls. They’re portable too and will stick to any metal surface, so you’ll be able to move and use them wherever you need them.

Buy it at Amazon: Huryee Magnetic Portable Rechargeable Under Cabinet LED Lights [Affiliate Link]

Comments

Popular posts from this blog

Vava Egg Shaped Kids Baby Night Light Review

Silkworld Ice Silk Briefs Review