Epic Water Filter Nano Dispenser, 2.2 Gal Review

Epic Water Filter Nano Dispenser, 2.2 Gal Review

As an Amazon Associate, I earn from qualifying purchases. #CommissionsEarned
Buy it at Amazon: Epic Water Filter Nano Dispenser, 2.2 Gal [Affiliate Link]

Takeaway: Large capacity, great tasting, clean water, but pricey filters.

I go through a lot of filtered water at home since it’s not just my go to beverage, but I use it for cooking, making tea and coffee, and even in my daily smoothies. One of the main things that frustrates me with my pitcher filter is that it takes a really long time to filter the water even with a brand new filter. After waiting 30 minutes, there’s still water in the reservoir, and I only end up with a few cups of usable water. I’ve resorted to transferring the filtered water into a second pitcher just so we can do back-to-back filtrations, taking up valuable countertop space. So I was pretty excited when Epic Water reached out and asked me to try their 2.2 Gallon nano dispenser which they sent at no cost in exchange for my honest review.

In the box, you’ll receive the water dispenser, a nano filter, and an instruction manual. There’s also a fact sheet that explains why TDS meters aren’t a great gauge for determining whether or not your water contains harmful contaminants, so be sure to give that a read.

The 2.2 Gallon water dispenser measures 12” L x 8” W x and 8.5” tall. The front and back of the dispenser is recessed so you can hold and lift the tank easily. Just above the front handhold is a filter life meter that counts down from 90 days in 30 day increments and lastly lets you know when you have fewer than 15 days left. This device is removable by inserting a mini flathead screwdriver into the notch at the top, so you can replace it if it stops working. At the bottom front, is an opening with male threads where you’ll attach the dispensing spigot.

On top of the tank is a black lid, with a sliding gray tab to open and close the fill reservoir. At the back of the lid is a notched tab that you can use to lift and remove the cover. It also helps you orient the cover since it can only face one direction. Inside you’ll find the dispenser’s spigot and installation instructions. It includes a pre-installed silicone o-ring and screw collar for assembly. The cup attached to the bottom of the reservoir is the filter. Since I have the gray cup, this indicates that it is the nano filter versus Epic’s standard pure filter, which is white in color. The filter is surprisingly lightweight and if you shake it, you won’t hear any moving particles, unlike the sandy-like charcoal grains of other water filters. This is because the technology of Epic’s nano filter utilizes a nanoalumina active layer containing powdered activated carbon and antimicrobial silver sandwiched between two layers of spunbond polyester, so everything is held together pretty tightly. This type of filter removes heavy metal contaminants, microplastic, as well as bacteria and viruses, making it a good choice for well water, camping, or for when there's a boil advisory.

Before use, you’ll want to wash and rinse the dispenser, but avoid getting soap or detergent in the filter. If you have hard water or known high levels of sediment, be sure to run your water for 15-30 seconds before filling the reservoir to flush out any sediment buildup. You’ll need to dispose of the first reservoir fill-up, as it may contain loose carbon or fibers from the manufacturing process, though you can repurpose this water for washing or watering plants. Then you can start drinking and using the water from subsequent fill ups. One full reservoir filters about 1 gallon of water, so to maximize the storage capacity, you’ll need to fill the reservoir up twice.

One thing to note is that the dispenser needs to be place near your counter or sink’s edge so that you can place a glass under the spigot. You can optionally purchase a custom wooden stand for it on their website, that raises the dispenser up off the table. Then just pull the tab down to start dispensing. It locks in place for continuous dispensing until you raise the tab back up. Don’t forget to initiate the filter life timer by pressing and holding the start button for 8 seconds. The 90 days is a general guideline, if you consume an average of 1-2/3 gallons per day, but actual filter life will vary depending on your usage; so be mindful that the filter is rated to perform well for around 150 gallons of water filtered before it should be replaced. The flow rate through the filter is about 30 minutes for 1 gallon.

The water from the nano dispenser is really neutral tasting, pleasant and refreshing. Compared to my tap water, which definitely has a chlorinated flavor and a musty earthiness to it. My pitcher filtered water has less of the chlorine taste but still a mild flavor of it and some mustiness to it as well. I think the main reason for the difference between the two filtration systems is that the nano filter removes contaminants that the granular carbon filter does not, according to the water analysis report provided by both manufacturers.

Overall, I’m happy with this water dispenser because it filters about 50% more water in the same amount of time, produces better tasting water, and is rated to capture potentially harmful contaminants that my regular water filter cannot. I can store a greater quantity of water at once and it’s easy to dispense the water with the spigot versus picking up the pitcher to pour. I do wish it the countertop stand was included versus an extra add-on, but you’ve also got the option to store the dispenser in your fridge if you prefer cold water. I’ve got an exclusive coupon code which I’ll leave in the description below, so you can save some money if you decide to buy something from Epic. They also have their own version of a pitcher filter as well as sports/travel bottles and an in-line under-sink filtration system.

As an Amazon Associate, I earn from qualifying purchases. #CommissionsEarned
Buy it at Amazon: Epic Water Filter Nano Dispenser, 2.2 Gal [Affiliate Link]